Air Conditioning Courses Hobart

Our Air Conditioning Courses Hobart & TAS

We Offer Leading Air Conditioning Installation Courses in Hobart

Our Hobart air conditioning course is currently being offered to tradespeople such as electricians, plumbers, gas fitters, and trade assistants who want to qualify for the installation and decommissioning of split system air conditioners and heat pump systems in Tasmania.

Our split systems course in Hobart is delivered in an off-job simulated workplace environment over 2 days* at an approved training venue. In this course, you will develop all of the essential skills for installing and decommissioning split system air conditioners and heat pump systems.

Please contact our office on 1300 856 832 for more information on our split system courses in Perth and surrounding areas.

98% of our students receive qualifications after successfully completing our comprehensive 2 day course and online theory!

Hobart Air Conditioning Split System Course

Glenorchy, TAS

View Course FAQ

(GST Free)

Online Theory / Simulated Workplace

2 days of practical training and assessment* with an online theory component

*Please note – The number of days of face to face practical training and assessment is determined for each individual learner based on a pre-screening assessment and how each person meets the pre-requisite requirements. For those who do not meet all the pre-requisites or require further training as determined during the pre-screening by your assessor, there may be additional face to face training (Up to 40 Hours) or workplace learning in the industry (Up to 120 hours) to meet the volume of learning for this qualification. Students have up to 12 months from the date of enrolment to complete this qualification

Flexible Courses

Work at your own pace within 12 months using our student online portal.

Qualified Trainers

Experienced trainers with leading industry expertise will train you.

Face to Face Training

Receive personalised, practical training in a simulated workplace environment.

Earning Potential

Increase your earning potential and employment prospects by learning how to install air conditioning systems.

Trainers explaining flares to students in our Perth air conditioning course

I have just completed my Cert 2 in split systems and heat pumps with Get Skilled Training. The course was very well delivered and the practical was very well facilitated.
This was one of the best courses I have attended, I cant fault it in any way at all.
Keep up the good work guys

Paul Lenton
Google Reivew

Course Information

Split System Course Purpose

The UEE20111 Certificate II in Split Air Conditioning and Heat Pump Systems course is a formal qualification that can be undertaken to enhance skills and qualification in air conditioning. 

This course is relevant to electricians and 3rd and 4th year electrical apprentices, as well as plumbers and gas fitters who apply for Recognition of Prior Learning.

When taking part in the split system course, you can gain the skills in installation, commissioning and decommissioning of single head, split AC and heat pumps systems that do not exceed 18 kW.

This air conditioner course covers all the requisite knowledge and skills needed in the air conditioning industry according to current standards. 

This includes preparing and connecting refrigerant tubing, bending and flaring, as well as evacuating split systems according to manufacturer’s instructions

Course Prerequisites

To take part in this course, you will need to be:

Teach watching a student training at our Perth split system course

Course Funding

For electrical workers, plumbers and air conditioning trade assistants currently working in the construction industry in Western Australia, funding is available with the Construction Training Fund to reduce training costs and to help businesses and employees to develop and enhance their skills. 

A maximum of $500 is available for training undertaking in Metropolitan Areas such as Perth. Click here for more details on this funding opportunity.

If you require further information on the Construction Training Fund’s Construction Skills or Industry Skills programs please phone (08) 9244 0100 or email

Construction Training Fund

Air Conditioner Course Dates

Our Perth air conditioning course dates are listed here. These dates are always updating as more courses are booked, so don’t forget to check back later to see if a more suitable time for you has been added.

If you are looking to expand your business we are able to run the course on demand at your location where applicable.  This is subject to minimum requirements.

For further details please call our office on 1300 856 832.

Perth Course Cost

Our Perth course fees: $1780 (GST Free) paid after enrolment.

Units Of Competency

Units Of Competency

UEENEEE038BParticipate in development and follow a personal competency development plan
UEENEEJ102APrepare and connect refrigerant tubing and fittings
UEENEEJ105APosition, assemble and start up single head split air conditioning and water heating heat pump systems
UEENEEJ172ARecover, pressure test, evacuate, charge and leak test refrigerants – split systems
UEENEEK142AApply environmentally sustainable procedures in the energy sector
Non-electrical workers who require prerequisites for this course, will also have to satisfy the below units of competency through recognition of prior learning:
UEENEEE101A:Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEE102AFabricate, assemble and dismantle utilities industry components
UEENEEE105AFix and secure electrotechnology equipment
UEENEEE107A:Use drawings, diagrams, schedules, standards, codes and specifications
UEENEEE137ADocument and apply measures to control OHS risks associated with electrotechnology work
The compulsory elective unit includes:
UEENEEC001BMaintain documentation

Course Outcome & Career Pathways

Air Con Course Outcome

Successful completion of Get Skilled Training’s Perth air conditioning course will satisfy the requirements the ARC to apply for a restricted Refrigerant Handling License. 

This refrigerant handling licence is known as the Restricted Split System Air Conditioning Installation and Decommissioning Licence, or simply ARC licence.

This licence will allow you to install and decommission split system air conditioners under 18kW. 

On completion of our Certificate II in Split Air Conditioning and Heat Pump System course you can then apply for your ARC licence, and be ready to progress your career further in the air conditioning industry.

Our split system course in Perth with teachers helping students

Career Pathways

You may undertake further studies to gain additional qualifications on successful completion of the split systems air conditioning course, these pathways can include a Certificate III in Air Conditioning and Refrigeration (UEE32211) or other qualifications listed in the UEE11 Training Package.

Click here for the full list of UEE11 qualifications on offer at Get Skilled Training. If you would like more information on our training course, call us today on 1300 856 832.

Get Skilled With Our Air Conditioning Course in Hobart Today!

As a registered training organisation, Get Skilled Training offers a professional approach,  to delivering your air conditioning installation course certification.

If you live in Hobart, Tasmania, update your skills and increase your earning potential by signing up to one of our UEE20111 Certificate II in Split Air Conditioning and Heat Pump Systems Courses today. 

You can Contact us online or call on 1300 856 832.


Awesome training and assessing experience, quality staff and quality information! Will recommend to anyone.
Braith Williams
Highly recommend Get Skilled, professional from the first phone call right through to the teachers/trainer assessors and it was a well priced course. Cheers guys.
Mitch Bidois
Great training, comprehensive course with great facilities. Am now confident to get out there and do some split installs.
Trevor Liston