Restricted Electrical Licence Course Brisbane
(Disconnect / Reconnect)
Salisbury, Brisbane
For alternative dates,
Please contact the Admin Team on 1300 856 832
$945-$2400*
(GST Free)
Online Theory / Simulated Workplace with on job training logbook
4-5 days of practical training and assessment depending on your trade background
If your job requires you to complete incidental electrical tasks in your day-to-day duties, there’s a good chance you need to get your Restricted Electrical Licence!
At Get Skilled, we offer nationally accredited restricted electrical courses that equip you with the skills and knowledge you need to get licensed and expand your trade skills. Whether you’re a plumber needing to learn how to disconnect and reconnect electric hot water systems, or you’ve got the experience but not the accreditation, we will tailor a course for your unique requirements.
Our Brisbane restricted electrical licence course is run year-round. Scroll down to find the next available date.
Restricted Electrical Licence Courses at a Glance
Courses are open to a variety of skilled trades that need to perform electrical work as part of your day-to-day duties. Contact us to discuss your eligibility.
Full course fees vary depending on the units of competency included on your electrical training permit. You can find detailed prices for your trade below.
Students are required to complete UEECD0007 before other units of competency. Additionally, UEERL0001 is a prerequisite to undertake UEERL0002.
Students are required to hold an electrical work training permit. Visit the Electrical Safety Office to obtain your permit or complete it during pre-enrolment.
Our restricted electrical licence course takes 2-5 days to complete practical training, including approximately 6-20 hours of online theory component.
Courses are delivered in-person at a Get Skilled training centre or at your workplace. Theory components are delivered through our online student portal.
Restricted electrical licence course can be completed online from your home or workplace. Practical training and assessment is delivered at Get Skilled’s Salisbury location.
Students need access to a computer, tablet or smartphone, and an internet connection. All other equipment is supplied by Get Skilled as part of your restricted electrical course fee.
Who is Eligible for a Restricted Electrical Licence Courses?
Undertaking a restricted electrical licence course is a great way to expand your current skill set and build your career. These courses are open to a broad range of skilled trades that need to perform some electrical work as part of your regular trade.
To be eligible for a restricted electrical licence, you must meet one of the following criteria:
- Current trade qualification of Certificate III or higher in the following trades:
- Electrical equipment service person
- Fitter and turner
- Gas Fitter
- Instrumentation/process control technician
- Laboratory and scientific electrical equipment technician
- Mechanical fitter
- Plumber and drainer
- Refrigeration and air-conditioning equipment service person
- Telecommunication technician, OR
- 3 years’ experience in a role that requires you to perform incidental electrical work, OR
- Hold an overseas qualification that is recognised by Trade Recognition Australia
Talk to the team at Get Skilled Training to find out more about proving your eligibility for our restricted electrical licence course.
The Restricted Electrical Licence Course Student Journey
Read through the following steps to gain an insight into what’s involved with completing your Restricted Electrical Licence Course and obtaining your licence in Brisbane.
Who is this course targeted at?
This restricted electrical course is offered to eligible tradespersons that are required to undertake restricted electrical works disconnecting, reconnecting, locating and repairing faults on electrical equipment in line with their trade.
Eligible Trades:
- Electrical equipment service person
- Fitter and turner
- Gas Fitter
- Instrumentation/process control technician
- Laboratory and scientific electrical equipment technician
- Mechanical fitter
- Plumber and drainer
- Refrigeration and air-conditioning equipment service person
- Telecommunication technician
Restricted Electrical Course Outcomes
After successfully completing all training and assessment, Get Skilled Training will send a completion statement to the ESO. We will also email you a copy of your statement of attainment for the units of competency that were achieved as part of your restricted electrical licence training course.
Your statement of attainment will allow you to apply for your Restricted Electrical Work Licence (REL) with the ESO and allow you to commence incidental electrical work within the scope of your trade.
Get Skilled Training offers a restricted electrical licence course that includes nationally-recognised units of competency. Your training may include:
- UEECD0007 – Apply Work Health and Safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single 230 Volt supply
- UEERL0002 – Attach cords, cables and plugs to electrical equipment for connection to 1000V a.c. or 1500V d.c. supply
- UEERL0004 – Disconnect – reconnect electrical equipment connected to low voltage (LV) installation wiring
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
Note: A logbook may be required as part of this course for UEERL0004 – Disconnect – reconnect electrical equipment connected to low voltage (LV) installation wiring. This will be determined by your assessor and is based on whether practical training is required by the student and the volume of learning requirements.
You are only allowed to undertake the units of competency outlined in your Electrical Safety Office (ESO) training permit. You may only undertake competencies that are required within the normal scope of your work, such as connecting and disconnecting cables, attaching plugs and fault finding appliances related to your trade calling.
You cannot undertake units of competency that fall outside the scope of your trade calling if they are not on your training permit.
Note: Restricted electrical licence course Students must have completed CPR training within 12 months of your application to the Electrical Safety Office (ESO) in QLD. Get Skilled offers the following units to undertake low voltage rescue and performing CPR:
- HLTAID009 – Provide cardiopulmonary resuscitation
- UETDRMP007 – Perform rescue from a live LV panel
Students may also undertake an additional unit of competency as part of this training program if they are required to test and tag equipment within their workplace:
- UEERL0003 – Conduct in-service safety testing of electrical cord connected equipment and cord assemblies (Test and Tag)
Our restricted electrical licence course is delivered at locations throughout Brisbane. We use a mix of online and face-to-face training and assessment. It takes approximately 2-5 days to complete your practical training and assessment for the restricted electrical licence course, including 6-20 hours of online theory (depending on the units of competency you need to obtain).
Once you have completed all restricted electrical course components, Get Skilled Training will issue a Statement of Attainment for your records, and a Form 39 Completion Statement to the Electrical Safety Office. This will allow you to apply for your restricted electrical licence.
Note that all students are required to hold a current training permit issued by the ESO. It takes approximately 2-3 weeks to obtain a permit, and your permit is valid for 12 months. You should aim to complete your training within that 12 month period. Students are permitted to begin the online theory components for the occupational health and safety unit of the course while waiting for a training permit to be issued.
Select your relevant trade below for course details, requirements and pricing
Appliance Servicing and Repair – Restricted Electrical Licence Course
Appliance Servicing and Repair Technicians who are required to undertake incidental electrical work within the scope of their trade for work with electrical appliances may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training.
This can be achieved by competing one of Get Skilled Training restricted electrical licencing training programs skillsets which are tailored to meet your trade requirements.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for Appliance Servicing and Repair Technicians to complete a restricted electrical course are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Required (Statutory declaration if self-employed)
Documentation Requirements
Course Delivery
Logbooks
May be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
- UEERL0002 – Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 415VAC
- Disconnect and Reconnect Appliances for 250VAC and 415VAC
- Locate and rectify faults in low voltage (LV) electrical equipment and replacement of electrical components within the appliance (PC Boards, Capacitors, Motors etc)
- Attaching plugs and cords for single phase appliances
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required:
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Workers with occupational requirement for a restricted electrical licence - Restricted Electrical Licence Course
Workers who require a restricted electrical licence to undertake incidental electrical work within the scope of their work with specific electrical equipment may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training if they have 3 years of experience in servicing and repairing equipment.
This can be achieved by competing one of Get Skilled Training restricted electrical licencing training programs skillsets which are tailored to meet your trade requirements.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for workers who require a restricted electrical licence (to undertake incidental electrical work within the scope of their work) are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Required (Statutory declaration if self-employed)
Documentation Requirements
- A letter from your employer outlining the need for an restricted electrical licence, and
- Three years’ experience in service/repairs of commercial equipment, domestic appliances, or equipment specific to an employer. (This should be outlined on the letter from your employer)
Course Delivery
Online Theory + 2-5 Days Face to Face Practical Training and Assessment
Logbooks
May be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 250VAC- Apply work health and safety regulations, codes and practices in the workplace
- Locate and rectify faults in low voltage (LV) electrical equipment and replacement of electrical components within the appliance (Elements, Sensors etc)
- Attaching plugs and cords for single phase appliances
- Disconnect and Reconnect Appliances for 250VAC (If required for work scope)
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required:
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Students who are only required to complete limited units of competency (which excludes UEERL0004) as per their ESO permit may be able to undertake this course at a reduced fee. Please contact our admin team for further information on 1300 856 832
Electronic Equipment – Restricted Electrical Licence Course
Electronic Technicians who are required to undertake incidental electrical work within the scope of their work within medical, biomedical, electronics, communications, business equipment, data and voice communications may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training.
This can be achieved by completing one of Get Skilled Training restricted electrical licencing training programs skill sets which are tailored to meet your trade requirements.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for Electronic Technicians to complete a restricted electrical course are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Required (Statutory declaration if self-employed)
Documentation Requirements
- UEE30920 – Certificate III in Electronics and Communications, or
- UEE30120 – Certificate III in Business Equipment, or
- UEE30420 – Certificate III in Data and Voice Communications, or
- MEM30405 Certificate III in Engineering (Electronics), or
- Diploma qualification or higher in electronics or equivalent
For Electronic Technicians who work on medical equipment limited to 250Vac (May be able to complete UEERL0002 to remove 250V restriction)
- Bachelor’s degree in medical/biomedical engineering or approved equivalent
Course Delivery
Logbooks may be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Logbooks
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
- UEERL0002 – Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c. (May be required to remove 250V restriction)
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring (May be required for work scope)
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 250VAC
- Disconnect and Reconnect Electronic Equipment for 250VAC (up to 415VAC if there is a job requirement)
- Locate and rectify faults in low voltage (LV) electrical equipment and replacement of electrical components within the electronic equipment if L0005 is completed (PC Boards, Capacitors, Motors etc)
- Attaching plugs and cords for single phase appliances
- Disconnect and Reconnect Appliances for 250VAC (If required for work scope)
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Students who are only required to complete limited units of competency (which excludes UEERL0004) as per their ESO permit may be able to undertake this course at a reduced fee. Please contact our admin team for further information on 1300 856 832.
Electric Motors/Electrical Machine Repair – Restricted Electrical Licence Course
Mechanical Fitters who are required to undertake incidental electrical work within the scope of their trade for work with electrical motors may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training.
This can be achieved by competing one of Get Skilled Training restricted electrical licencing training programs skillsets which are tailored to meet your trade requirements.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for Mechanical Fitters to complete a restricted electrical course are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Required (Statutory declaration if self-employed)
Documentation Requirements
- A letter from your employer outlining the need for a restricted electrical licence
- Mechanical/diesel fitter, or motor mechanic/auto electrician with two years’ experience in mechanical fitting work. (This should be outlined on the letter from your employer)
Course Delivery
Online Theory + 4 Days Face to Face Practical Training and Assessment
Logbooks
May be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 250VAC
- Disconnect and Reconnect Electronic Equipment for 250VAC (up to 415VAC if there is a job requirement)
- Replacement of motors only, like for like (eg. 3kW for 3kW)
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required:
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Fire Protection Control Equipment Limited to 250Vac – Restricted Electrical Licence Course
Fire protection and control technicians who are required to undertake incidental electrical work within the scope of their trade for work with fire alarm systems may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training.
This can be achieved by completing one of Get Skilled Training restricted electrical licencing training programs skill sets which are tailored to meet your trade requirements for work in fire protection and control.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for Fire Protection and Control Technicians to complete a restricted electrical course are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Not Required
Documentation Requirements
- UEE31020 – Certificate III in Fire Protection Control, or
- Current QBCC licence
Course Delivery
Logbooks
May be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
- UEERL0002 – Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c. (To remove the 250V Restriction)
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 250VAC (415VAC if L0002 is completed)
- Disconnect and Reconnect Alarms and Fire Systems up to 250VAC or (up to 415VAC if there is a job requirement)
- Locate and rectify faults in low voltage (LV) electrical equipment and replacement of fire alarm systems only.
- Attaching plugs and cords for single phase appliances (Three phase appliances if L0002 if completed)
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required:
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Gas Appliances/Equipment Limited to 250Vac – Restricted Electrical Licence Course
Gas Fitters with Type A or Type B gas licences who are required to undertake incidental electrical work within the scope of their trade for work with electrical equipment may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training.
This can be achieved by completing one of Get Skilled Training restricted electrical licencing training programs skill sets which are tailored to meet your trade requirements.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for Gas Fitters to complete a restricted electrical course are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Required (Statutory declaration if self-employed)
Documentation Requirements
- Current Queensland gas installer/fitter licence, or
- Current Queensland Gas Work Authority, and
- A letter from your employer outlining the need for a restricted electrical licence
Course Delivery
Logbooks
May be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
- UEERL0002 – Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c. (To remove the 250V Restriction)
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 250VAC (415VAC if L0002 is completed)
- Disconnect and Reconnect Appliances for 250VAC and 415VAC
- Replacement of electrical components within the appliance (PC Boards, Capacitors, Motors etc)
- Locate and rectify faults in low voltage (LV) within gas appliances that contain electrical equipment
- Attaching plugs and cords for single phase appliances (Three phase appliances if L0002 if completed)
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required:
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Instrumentation and Process Control Devices – Restricted Electrical Licence Course
Instrument fitters who are required to undertake incidental electrical work within the scope of their trade for work with instrumentation and process equipment may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training.
This can be achieved by completing one of Get Skilled Training restricted electrical licencing training programs skill sets which are tailored to meet your trade requirements.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for Instrument Fitters to complete a restricted electrical course are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Not Required
Documentation Requirements
- UEE31220 – Certificate III in Electrotechnology – Instrumentation and Control, or
- Trade certificate in instrumentation
Course Delivery
Logbooks
May be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
- UEERL0002 – Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 415VAC (415VAC if L0002 is completed)
- Disconnect and Reconnect Appliances for 250VAC and 415VAC
- Locate and rectify faults in low voltage (LV) within gas appliances that contain electrical equipment (PC Boards, Capacitors, Motors etc)
- Attaching plugs and cords for single phase appliances
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required:
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Refrigeration and Air Conditioning Equipment – Restricted Electrical Licence Course
Refrigeration mechanics who are required to undertake incidental electrical work within the scope of their trade for work with air conditioning and refrigeration equipment may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training.
This can be achieved by completing one of Get Skilled Training restricted electrical licencing training programs skill sets which are tailored to meet your trade requirements.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for Refrigeration Mechanics to complete a restricted electrical course are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Not Required
Documentation Requirements
- UEE32220 – Certificate III in Air Conditioning and Refrigeration, or
- MEM30219 – Certificate III in Engineering Mechanical Trade – Refrigeration & Air Conditioning, or
- Trade certificate as refrigeration mechanic
Course Delivery
Logbooks
May be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
- UEERL0002 – Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 415VAC
- Disconnect and Reconnect Appliances for 250VAC and 415VAC
- Locate and rectify faults in low voltage (LV) electrical equipment and replacement of electrical components within the appliance (PC Boards, Capacitors, Motors etc)
- Attaching plugs and cords for single and three phase air conditioning and refrigeration equipment
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required:
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Water Heaters Limited to 250Vac – Restricted Electrical Licence Course
Plumbers who are required to undertake incidental electrical work within the scope of their trade for work with hot water systems may be eligible to undertake this restricted electrical licence course and up-skill with Get Skilled Training.
This can be achieved by completing one of Get Skilled Training restricted electrical licencing training programs skill sets which are tailored to meet your trade requirements.
All courses require students to complete a mandatory occupational health and safety unit of competency UEECD0007 Apply work health and safety regulations, codes and practices in the workplace. Students may be eligible for Recognition of prior learning (RPL) for this unit.
The eligibility requirements for Plumbers to complete a restricted electrical course are below:
- Training Permit with Electrical Safety Office QLD (ESO) – Required before to undertaking practical course
- Employer Support Letter – Not Required
Documentation Requirements
- Current Queensland plumber’s licence
Course Delivery
Logbooks
May be required depending on your level of competency, employer and ESO requirements. For students who are required to complete logbooks this can be completed in a simulated workplace environment at a Get Skilled Training venue or in the students workplace under the supervision of a licenced electrical worker using an established workplace procedure documented on our online learning management system.
Units of Competency in this Course
- UEECD0007 – Apply work health and safety regulations, codes and practices in the workplace
- UEERL0001 – Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
- UEERL0002 – Attach cords, cables and plugs to electrical equipment for connection to 1000 V a.c. or 1500 V d.c.
- UEERL0004 – Disconnect/reconnect electrical equipment connected to low voltage (LV) installation wiring
- UEERL0005 – Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
- HLTAID009 – Provide cardiopulmonary resuscitation
Licence Outcome and Scope of Licence
- Restricted Electrical Licence limited to 250VAC
- Disconnect and Reconnect Hot Water Systems for 250VAC
- Locate and rectify faults in low voltage (LV) within hot water systems and replacement of electrical components within the equipment (Elements, Thermostats, Pumps etc)
- Attaching plugs and cords for single phase appliances
- Test and tag appliances (if test and tag unit UEERL0003 is successfully completed)
Total Course Cost Depending on the units required:
| Unit Code | Unit Name | Cost |
|---|---|---|
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring. | $1200 |
| UEERL0002 | Attach cords, cables and plugs to electrical equipment for connection to 100V a.c. or 1500V d.c. | $260 |
| UEERL0001 | Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply. | $390 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures. | $550 |
| UEECD0007 | Apply workplace health and safety regulations, codes and practices in the workplace. | $150 |
| UETDRMP007 | Perform rescue from a live LV panel. | $100 |
| HLTAID009 | Perform cardiopulmonary resuscitation. |
*Please Note: For students who are unable to complete their logbook in the workplace, this can be completed under the supervision of a trainer for an additional cost of $150 GST Free.
Improved employment status after training
Satisfaction rate
2023 National SOS Report
Recommend Get Skilled Training
Our Google Reviews
Get Skilled With Our Restricted Electrical Courses Today!
A Restricted Electrical Licence will help you level up your career and pursue more advanced tasks in your current workplace. With this course under your belt, you can undertake incidental electrical work using safe work practices and make sure that items you work on are electrically safe.
Don’t delay your training. Call Get Skilled Training today on 1300 856 832 or simply fill out our online contact form, and you’ll be on your way to the next big thing!