Course Funding
A variety of government-subsidised funding programs are available to help reduce fees for eligible students, apprentices and employers. Simply select your course below to view funding opportunities based on your state or territory.
UEE32225 Apprenticeship Funding - QLD Only
Government-subsidised funding is available for eligible students enrolling in this course through an Apprenticeship Pathway. These subsidies help reduce the cost of your training. In some cases, the full cost is covered and you won’t pay anything. In other cases, you may be required to pay a co-contribution fee (an out-of-pocket contribution). Reduced co-contribution (concession) fees may apply if you hold a valid concession card, identify as Aboriginal or Torres Strait Islander, are under 17 and not currently at school, or are experiencing genuine financial hardship.
Get Skilled Training is a Skills Assure Supplier (SAS) approved by the Queensland Government Department of Trade, Employment and Training.
This means we are authorised to deliver government-subsidised apprenticeship training through the following funding programs:
- Career Start Program
- Free Apprenticeships for Under 25s
- School-Based Apprenticeships and Traineeships (SATs)
Please Note: Students can access funding for up to two government-funded apprenticeships or traineeships across the SATs, Career Start, and Career Boost programs. These can both be completed through the Career Start Program. Only one apprenticeship or traineeship can be funded at a time. If two contracts are active at once, only the one with the earliest start date will be funded (subject to eligibility).
Free Apprenticeships for Under 25s
If you’re under the age of 25 and starting your apprenticeship in Queensland, you may be eligible for the Free Apprenticeships for Under 25s program. This covers the full cost of your training, meaning you won’t pay any co-contribution fees.
School-Based Apprenticeships and Traineeships (SATs)
Eligible Year 10, 11 and 12 students can begin their trade career through a School-Based Apprenticeship or Traineeship (SAT). SATs allow you to earn a wage, gain real workplace experience and work toward a nationally recognised qualification while completing high school. Funding is available for one SAT at a time. SAT students do not pay co-contribution fees while at school; however, if you continue your apprenticeship after graduation, co-contribution fees may then apply.
Career Start Program
The Career Start program supports Queenslanders in gaining practical skills to enter the workforce, advance their trade career, or move into full-time employment through an apprenticeship or traineeship.
For eligible students undertaking an Apprenticeship Pathway, the Queensland Government provides a subsidy toward the cost of training and assessment. This significantly reduces your out-of-pocket expenses.
Co-Contribution Fees:
If you are not eligible for fully subsidised training under the Free Apprenticeships for Under 25s program, or you are not exempt as a School-Based Apprentice or Trainee, you will still receive reduced course costs through the Career Start program. In these cases, a small co-contribution fee will apply, which can be paid by either you or your employer.
Co-contribution fees are calculated based on $1.60 per nominal hour for each unit of competency and are paid gradually throughout your apprenticeship. You, your employer or a third party will be invoiced before a unit of competency is opened, and payment must be made prior to commencing training for that unit.
Reduced Co-Contribution Fees (Concessions):
You may be eligible for a concession rate on co-contribution fees if you meet one of the following criteria:
- Holds a Health Care, Veteran or Pensioner Concession Card issued under Commonwealth law, or is the partner or a dependant of a person who holds such a card and is named on the card,
- Identify as Aboriginal or Torres Strait Islander,
- Are under 17, not at school, and have not completed Year 12,
- Are experiencing genuine financial hardship (supporting evidence required)
If eligible, your co-contribution fee will be reduced in line with Queensland Government guidelines.
National Incentives for Apprentices and Employers
Through the Australian Apprenticeships Incentive Program, eligible apprentices and employers may be able to access government-funded financial support. These incentives are designed to:
- Help employers hire and retain apprentices in skills-shortage trades
- Assist apprentices with cost-of-living expenses
- Support the purchase of tools, equipment and resources needed on the job
To check your eligibility and available incentive payments, contact your Apprenticeship Connect Australia Provider (ACAP).
Scheduling Fees & Units of Competency
Use the table below to view indicative co-contribution fees per unit. Your total out-of-pocket cost depends on the elective selection and funding eligibility. (Electives may vary depending on workplace needs.)
For more information about what these course units involve, call Get Skilled on 1300 856 832.
| UNIT CODE | UNIT NAME | Core/Elective | Nominal Hours | Contribution Fee ($1.60/hr) | Concessional Fee ($0.64/hr) | Fee-Free |
|---|---|---|---|---|---|---|
| UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace | Core | 20 | $32.00 | $12.80 | $0.00 |
| UEECD0016 | Document and apply measures to control WHS risks associated with electrotechnology work | Core | 20 | $32.00 | $12.80 | $0.00 |
| UEECD0019 | Fabricate assemble and dismantle utilities industries components | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEECD0020 | Fix and secure electrotechnology equipment | Core | 20 | $32.00 | $12.80 | $0.00 |
| UEECD0042 | Solve problems in ELV single path circuits | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEECD0051 | Use drawings, diagrams, schedules, standards, codes and specifications | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEECO0010 | Participate in refrigeration and air conditioning work and competency development activities | Core | 60 | $96.00 | $38.40 | $0.00 |
| UEERA0031 | Diagnose and rectify faults in air conditioning and refrigeration control systems | Core | 60 | $96.00 | $38.40 | $0.00 |
| UEERA0035 | Establish the basic operating conditions of air conditioning systems | Core | 20 | $32.00 | $12.80 | $0.00 |
| UEERA0036 | Establish the basic operating conditions of vapour compression systems | Core | 60 | $96.00 | $34.40 | $0.00 |
| UEERA0044 | Find and rectify faults in single phase motors and associated controls | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEERA0045 | Find and rectify faults in three phase motors and associated controls | Core | 30 | $48.00 | $19.20 | $0.00 |
| UEERA0050 | Install refrigerant pipe work, flow controls and accessories | Core | 60 | $96.00 | $38.40 | $0.00 |
| UEERA0099 | Install, commission, service and maintain air conditioning systems | Core | 80 | $128.00 | $51.20 | $0.00 |
| UEERA0052 | Install, commission, service and maintain low temperature systems | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEERA0053 | Install, commission, service and maintain medium temperature systems | Core | 60 | $96.00 | $38.40 | $0.00 |
| UEERA0059 | Prepare and connect refrigerant tubing and fittings | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEERA0062 | Recover and charge refrigerants | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEERA0079 | Safely handle refrigerants and lubricants | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEERA0081 | Select refrigerant piping, accessories and associated controls | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEERA0092 | Solve problems in low voltage refrigeration and air conditioning circuits | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEERA0094 | Verify functionality and compliance of refrigeration and air conditioning installations | Core | 40 | $64.00 | $25.60 | $0.00 |
| UEERE0001 | Apply enrironmentally and sustaintable procedures in the energy sector | Core | 20 | $32.00 | $12.80 | $0.00 |
| UEERL0001 | Attach chords and plugs to electrical equipment for connection to a single phase 230 Volt supply | Core | 20 | $32.00 | $12.80 | $0.00 |
| UEERL0002 | Attach chords, cables and plugs to electrical equipment for connection to 1000 V a.c or 1500 V d.c | Core | 20 | $32.00 | $12.80 | $0.00 |
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | Core | 60 | $96.00 | $38.40 | $0.00 |
| UEERL0005 | Locate and rectify faults in low voltage (LV) electrical equipment using set procedures | Core | 20 | $32.00 | $12.80 | $0.00 |
| Core Nominal Hours | 1,070 | |||||
| CPCWHS1001 | Prepare to work safely in the construction industry | Elective | 10 | $16.00 | $6.40 | $0.00 |
| UEERA0006 | Apply safety awareness and legal requirements for carbon dioxide refrigerant | Elective | 10 | $16.00 | $6.40 | $0.00 |
| UEERA0007 | Apply safety awareness and legal requirements for flammable refrigerants | Elective | 10 | $16.00 | $6.40 | $0.00 |
| UEERA0084 | Service and repair self-contained flammable refrigerants air conditioning and refrigeration systems | Elective | 20 | $32.00 | $12.80 | $0.00 |
| UEERA0069 | Resolve problems in beverage dispensers | Elective | 40 | $64.00 | $25.60 | $0.00 |
| UEERA0073 | Resolve problems in ice making systems | Elective | 20 | $32.00 | $12.80 | $0.00 |
| HLTAID009 | Provide cardiopulmonary resuscitation | Elective | 10 | $16.00 | $6.40 | $0.00 |
| UETDRMP007 | Perform rescue from a live low voltage panel | Elective | 20 | $32.00 | $12.80 | $0.00 |
| Elective Nominal Hours | 130 | |||||
UEE20120 Certificate II in Split Air Conditioning Funding Schemes - ACT, SA, TAS & WA Only
Australian Capital Territory
For electrical workers, plumbers and air conditioning trade assistants currently working for a company or organisation that carries out work in the ACT, a funding rebate is available with the ACT Building and Construction Industry Training Fund Authority (TFA) to reduce training costs and to help businesses and employees to develop and enhance their skills.
South Australian Course Funding
Funding may be available to eligible SA residents through the Construction Industry Training Board (CITB). To receive CITB subsidised training, eligible students are required to supply their valid CITB number to Get Skilled Training at enrolment which allows us to confirm your eligibility prior to the course commencement. To apply, find or renew your CITB number, please visit the CITB here!
Further information regarding eligibility and CITB funding is attached in a link below for your reference.
Eligibility to Obtain CITB Funding Support Criteria
CITB fact Sheet with Get Skilled Training
Get Skilled training currently has funding allocations for the following units within this qualification:
| UNIT CODE | UNIT TITLE | COURSE SERVICE ID | SUBSIDY AMOUNT OFFERED BY CITB WHICH GET SKILLED TRAINING WILL PASS ON |
|---|---|---|---|
| UEERA0059 | Prepare and connect refrigerant tubing and fittings | 1339 | $250 |
| UEERA0049 | Position, assemble and start up single head split air conditioning and water heating heat pump systems | 1338 | $250 |
Please note: You must complete the course before Get Skilled Training can process a claim with CITB. Students must provide their bank details to have the subsidy reimbursed which will be paid within 5 business days of Get Skilled Training receiving the CITB subsidy. It may take 2 weeks for CITB to approve the funding rebate after Get Skilled Training has submitted the claim (please allow 3 to 4 weeks after completion of your course to receive the rebate).
Apprentices within the first 24 months of their apprenticeship will not be eligible for funding as referenced in the CITB apprentice toolkit booklet. The subsidy cannot be provided for units of competency that Credit Transfer is granted for.
Tasmanian Course Funding
Students working for a company or as a sole trader in the building and construction industry may be eligible for funding for this course with Keystone. An application must be made with Keystone up to 3 full business days before training begins. To fill in a Keystone application please click here.
Western Australian Course Funding
For electrical workers, plumbers and air conditioning trade assistants currently working in the construction industry in Western Australia, funding is available with the Construction Training Fund to reduce training costs and to help businesses and employees to develop and enhance their skills.
A maximum of $500 is available for training undertaking in Metropolitan Areas such as Perth. Click here for more details on this funding opportunity.
If you require further information on the Construction Training Fund’s Construction Skills or Industry Skills programs please phone (08) 9244 0100 or email inquiries@bcitf.org.
Test & Tag Course Funding - SA Only
South Australian Course Funding
Funding may be available to eligible SA residents through the Construction Industry Training Board (CITB). To receive CITB subsidised training, eligible students are required to supply their valid CITB number to Get Skilled Training at enrolment which allows us to confirm your eligibility prior to the course commencement. To apply, find or renew your CITB number, please visit the CITB here!
Further information regarding eligibility and CITB funding is attached in a link below for your reference.
Eligibility to Obtain CITB Funding Support Criteria
CITB Fact Sheet with Get Skilled Training
Get Skilled training currently has funding allocations for the following units within this qualification:
| Unit Code | Unit Title | course dervice ID | SUBSIDY AMOUNT OFFERED BY CITB WHICH GET SKILLED TRAINING WILL PASS ON |
|---|---|---|---|
| UEERL0003 | Safety testing of electrical equipment and cord assemblies (Test and Tag) | 53 | $190 |
Please note: You must complete the course before Get Skilled Training can process a claim with CITB. Students must provide their bank details to have the subsidy reimbursed which will be paid within 5 business days of Get Skilled Training receiving the CITB subsidy. It may take 2 weeks for CITB to approve the funding rebate after Get Skilled Training has submitted the claim (please allow 3 to 4 weeks after completion of your course to receive the rebate).
The subsidy cannot be provided for units of competency for which Credit Transfer is granted.
Still Unsure About Your Training Costs?
We understand that funding programs, eligibility requirements and fee types can sometimes be confusing, but our team is here to help. Give us a call on 1300 856 832 and we can:
- Check if you’re eligible for free or subsidised training
- Explain any co-contribution or out-of-pocket costs
Discuss available funding options for your course - Point you in the right direction for incentive support, where applicable
We’ll make sure you understand your fees before you enrol.
Financial Hardship Support
We recognise that circumstances can change. If you’re facing financial difficulty, Get Skilled Training may be able to work with you (and your employer, if applicable) to arrange flexible payment support or alternative fee arrangements.
If you require assistance, please contact our team to discuss what options may be available. We’re here to help you continue your training journey with confidence.